@namaste7

We are still unable to recreate this issue on our end.

In order to provide you with the best assistance, we would need to further investigate the issue on your server.
Please raise a ticket at https://webkul.uvdesk.com/en/customer/create-ticket/.

@Usman We have checked it at our end and it is working fine. We will have to check this issue on your server. For this we will need your credentials. Please create a ticket at https://webkul.uvdesk.com/en/customer/create-ticket/ and share your credentials over there.

@jrabah, Currently we do not have the feature to set the price of the rooms based on the length of the stay in our default system.

This feature is already included in our roadmap and it may be available in the next major release. But we cannot quote any specific time right now.

If you want it now then we can customize this for you and it may be a paid service. And for this, you have to raise a ticket and state your requirements at https://webkul.uvdesk.com/en/customer/create-ticket/

Hi @DoodleDandy, we are happy to hear that your issue has been resolved.

I know, you know who it is and that it's malicious. The point of this exercise is to kill them with kindness and bend over backwards to make them happy, which you will never be able to do, which shows how unreasonable and crazy they are. It's also a chance to show that they were never a client or customer...which basically negates the bad review as the ramblings of a crazy person.

@elearning We have checked that there is no issue in sending Test emails if default language is Traditional Chinese.

Please make sure that you have set proper configuration options on Advanced Parameters > E-mail > EMAIL section.
Refer: https://webkul.chatwhizz.com/share/screenshot/649962a37b4603072b06ca34

Also, if you are using SMTP credentials for email, make sure that you enter the correct values.

If issue still persists, please raise a ticket at https://webkul.uvdesk.com/en/customer/create-ticket/.

Hi @hitchcocknz,
In the default QloApps, You create room types and assign different rooms under them. When a guest books a room type then rooms of that room type are booked.
So rooms are booked under a room type for a booking in QloApps.

But as per your requirement, you want to book bunk/beds in a room.
So we recommend you follow the below process:

Create a room type for a room Create rooms for your bunks.

Now your guests can purchase the number of rooms (which are bunks in your system) of a room type (which is room in your system) then automatically bunks will be booked of your room in your booking platform.

This will allow you to implement per bunk/bed booking system in QloApps.

Hi @abubakar ,

Thank you for patiently waiting

Please allow me to explain the default scenarios by which customers can register in the QloApps.

Registration from the login page

Registration while Checkout

1. Registration from the login page

On the login page, the customers can register with address or without an address.

1.1 Registration from login page without Address

For this, you have to change the Registration process type setting from the back office.

Under the Preferences tab > Customers > General, change the Registration process type to Only account creation.

Kindly refer to this screenshot: https://webkul.chatwhizz.com/share/screenshot/648c390cc47b6305ab6a2582

After this, on the login page, the customers can log in without entering the address.

Kindly refer to this screenshot: https://webkul.chatwhizz.com/share/screenshot/648c3bccd34818059e0eeed0

1.2 Registration from login page with Address

For this, you have to change the Registration process type setting from the back office.

Under the Preferences tab > Customers > General, change the Registration process type to Standard (account creation and address creation).

Kindly refer to this screenshot: https://webkul.chatwhizz.com/share/screenshot/648c390cc47b6305ab6a2582

After this, on the login page, the customers can register with the address.

Kindly refer to this screenshot: https://webkul.chatwhizz.com/share/screenshot/648c3e9c0a816116d544bae0

2. Registration while Checkout

Guests who are not already registered on the system can register at the checkout page with or without an address.

2.1 Registration at checkout page without Address

For this, you have to Disable the Address creation during checkout from the back office.

Under Preferences tab > Customers > General, disable Address creation during checkout

Kindly refer to this screenshot: https://webkul.chatwhizz.com/share/screenshot/648c4220c47b6305ab6a4282

After this, at the checkout page, the customers can register without entering the address.

Kindly refer to this screenshot: https://webkul.chatwhizz.com/share/screenshot/648c4468c47b6305ab6a49e3

2.2 Registration at checkout with Address

For this, you have to Enable the Address creation during checkout from the back office.

Under Preferences tab > Customers > General, disable Address creation during checkout

Kindly refer to this screenshot: https://webkul.chatwhizz.com/share/screenshot/648c73d9c47b6305ab6ad66e

After this at the checkout page, the customers can register with the address.

Kindly refer to this screenshot: https://webkul.chatwhizz.com/share/screenshot/648c3e080a816116d544b86e

How can I make email and password optional

You have to Enable the guest checkout setting from the back office to allow customers to checkout without a password.

Under Preference > Order > General > Enable Guest Checkout

Kindly refer to this screenshot: https://webkul.chatwhizz.com/share/screenshot/648c40d30a816116d544c18c

Kindly refer to this screenshot: https://webkul.chatwhizz.com/share/screenshot/648c45eec47b6305ab6a4fb3

In the Guest Checkout also, after enabling or disabling the Address creation during checkout from the back office, the customers can checkout by entering the address or without the address.

Kindly refer to this: https://webkul.chatwhizz.com/share/screenshot/648c73d9c47b6305ab6ad66e

Kindly refer to this: https://webkul.chatwhizz.com/share/screenshot/648c66b00a816116d5453689

Note: It is mandatory to keep the email ID as it is necessary to process customers in the QloApps

If you have any more queries kindly raise the ticket from here: https://webkul.uvdesk.com/en/customer/create-ticket/

Hi @hotelisisnl ,

QloApps provides you the option of swapping your room reservations or reallocating your room bookings. To know more about the process, please refer to the following document.

Swapping and Reallocating: https://qloapps.com/qlo-reservation-system/#section-32

The availability of your rooms can be monitored on the dashboard and on the back office Booking Calendar. Go through the document to learn how to track availability in QloApps.

Dashboard: https://qloapps.com/qlo-reservation-system/#section-54

We are unable to identify the function of the Room Map which you have mentioned. We request you to raise a ticket from here: https://webkul.uvdesk.com/en/customer/create-ticket/

Hi @RDVAdmin ,

Currently, we have only per-day pricing in QloApps. As of now, occupancy wise pricing is not supported but this feature is in our roadmap. Currently, we cannot give you any strict deadline for it.

However, if you need the occupancy wise pricing on an urgent basis, we request you to create a ticket from here: https://webkul.uvdesk.com/en/customer/create-ticket/

I think this is super helpful. I have always wondered how to do that and this just answers that question. Thanks a lot for this. Might have to try doing this later.

Hi Ollie! Yes, it's definitely possible to set up a booking as a request that needs to be approved rather than a direct booking. In fact, many businesses prefer this approach as it allows them to review and approve bookings on a case-by-case basis, ensuring that they can accommodate each request in the best way possible.

I really appreciate this app since it has everything you need to build and manage your online store. Whether you're a small business owner or a large corporation, Qloapps is the perfect choice for anyone looking to enhance their online presence and drive sales

Hi @lambdawinner829 ,
We are not clear with your query, please explain in more detail so that we can help you better.

@namaste7 Yes, QloApps can be installed using command line as well. Refer to the link below for help:

QloApps Installation through Command Line Interface (CLI): https://github.com/Qloapps/qloapps-docs/blob/master/docs/introduction/installation.md#qloapps-installation-through-command-line-interface-cli

@abhisheksharma

Thank you very much! I will download it today and review it. Greetings from Germany.

@namaste7 The displayed hotel lacation on the room type detail page is generated in ProductController.php. You can modify the given line to remove double commas.

Line 285: https://github.com/webkul/hotelcommerce/blob/v1.5.2/controllers/front/ProductController.php#L285

@abhisheksharma Thanks!

@amebu96 , Not an issue, you can raise a ticket and share the FTP login credentials there so our tech team can assist you further. Make sure, you don't share any login credentials here publicly.

@melamanehermanus can you share on how did you go about on this?